OPERATION DETAILED CONTROLS AND GAUGES
3-45
Maintenance Selector Switch 3
When switch F5 is pressed on the standard screen, the monitor
display screen switches to the maintenance mode screen.
The items on the maintenance display are as follows.
a: Maintenance items
b: Default maintenance interval settings (h)
c: Time remaining until maintenance (h)
ab
Change engine oil 500
Replace engine oil filter 500
Replace fuel pre-filter 500
Replace fuel main filter 1000
Replace hydraulic oil drain filter 500
Replace hydraulic oil pilot filter 500
Replace hydraulic oil filter 1000
Replace hydraulic tank breather 1000
Change PTO case oil 1000
Change final drive case oil 2000
Change swing machinery case oil 1000
Change hydraulic oil 5000
Replace oil cooler accumulator 4000
To Next Page
Loading...
