DETAILED CONTROLS AND GAUGES OPERATION
3-56
3. On the clock adjustment selection screen, it is possible to carry out the following operations with switches F3
to F6.
q Time
Adjust the hour setting.
1) If “Time“ (a) is not highlighted in yellow, press switch F6 to
highlight “Time“ (a) in yellow. When this is done, hour dis-
play (b) changes to orange.
Adjust hour display (b) with the switches as follows. If it is
not necessary to change the hour setting, press switch F6.
F3: Time advances 1 hour.
F4: Time goes back 1 hour.
F5: Cancels change and returns to user menu.
F6: Accepts change and goes to setting for minutes.
2) When minute display (c) is highlighted in orange, operate
the switches as follows to adjust minute display (c).
If it is not necessary to change the minute setting, press
switch F6. If the time has been changed, always press
switch F6.
F3: Time advances 1 minute.
F4: Time goes back 1 minute.
F5: Cancels change and returns to user menu.
F6: Accepts change and goes to setting for 12/24 hour dis-
play mode.
To Next Page
Loading...
