DETAILED CONTROLS AND GAUGES OPERATION
3-80
Cigarette Lighter
Use this switch (9) to light cigarettes.
When the cigarette lighter is pushed in, it will return to its origi-
nal position after several seconds, so pull it out and light your
cigarette.
If the cigarette lighter is removed, the socket can be used as
the power source for the yellow flashing lamp. The capacity of
the cigarette lighter is 85W (24V x 3.5A).
12V Power Supply
The capacity of power supply (10) is 60W (12V x 5A).
Rotating Lamp Switch
(If equipped)
Use this switch (11) to light up the rotating lamp.
(a) ON position: Lights up
(b) OFF position: Goes out
12V
9JH10621A
To Next Page
Loading...
