OPERATION DETAILED CONTROLS AND GAUGES
3-23
Wiper Monitor
This monitor (3) shows the actuation status of the wipers.
The monitor display showing the wiper switch operating status is as follows.
ON lighted up: Continuous actuation of wiper (both upper and
lower ones)
ON lighted up: Continuous actuation of wiper (upper only)
INT lighted up: Intermittent actuation of wiper (both upper and
lower ones)
OFF: Wiper stopped
q For details of the positions of the wiper switch, see “CONTROLS AND GAUGES (3-3)“.
Auto-deceleration Monitor, Auto Low-idle Monitor
Monitor (4) shows if the auto-deceleration is being actuated.
The monitor display when auto-deceleration switch is operated,
as follows.
Auto-deceleration monitor ON: Auto-deceleration actuated
Auto-deceleration monitor OFF: Auto-deceleration canceled
q For details of the positions of the auto-deceleration switch,
see “CONTROLS AND GAUGES (3-3)“.
To Next Page
Loading...
