14. FRONT WHEEL/FRONT SUSPENSION/
STEERING SYSTEM
14-18
MXU 500
Check the front upper arm vertical
movement by moving it up and down.
If vertical movement is tight, binding or
roughs, replace the inner bushes as a set.
Check the front lower arm bracket of the
frame.
If bent, cracked or damaged, repair or
replace the frame.
Check the tightening torque of the front
lower arm securing nuts.
Torque: 4.5 kgf-m (45 N-m, 32 lbf-ft)
Check the front lower arm side play by
moving it from side to side.
If side play noticeable, replace the inner
bushes as a set.
Check the front lower arm vertical
movement by moving it up and down.
If vertical movement is tight, binding or
roughs, replace the inner bushes as a set.
To Next Page
Loading...
