16. BRAKE SYSTEM
16-19
MXU 500
7. Fill the brake reservoir (front brake lever)
with brake fluid.
8. Loosen the delay valve bleed valve nut.
Connect the transparent hose to the bleed
valve.
Use the syringe to draw brake fluid into
it until there is no air bubbles in the
transparent hose.
Then, tighten the bleed valve nut.
Torque: 0.6 kgf-m (6 Nm, 4.32 lbf-ft)
Recommended Brake Fluid: DOT-4
9. Fill the brake reservoir (brake pedal)
with brake fluid.
Reservoi
Bleed Valve
xWhen drawing brake fluid with the
syringe, the brake fluid level should be
kept over 1/2 of the brake reservoir
height (front brake lever).
xUse only the recommended brake fluid.
＊
Reservoi
To Next Page
