Kyocera TASKalfa 620 - Page 11

Copying Functions
1-5
4
Press [Size Entry].
5
Press [+] and [-] to specify the vertical
size (Y).
With metric models, you can enter the size directly using the numeric keys after pressing [#-Keys].
6
Press [+] and [-] to specify the horizontal
size (X).
With metric models, you can enter the size directly using the numeric keys after pressing [#-Keys].
7
Press the Start key to start copying.
Ready to copy.
Select
11x8½"
8½x5½"
5½x8½"
11x17"
Other
Size Entry
Auto 8½x14"
8½ x1 1"
11x15"
8½ x1 3½"
8½ x1 3"
A4
BackOriginal Size
A4
Cus
stand.Size
Paper Size
11x8
100%
2x2"
2x2"
2x2"
2x2"
Shortcut
size
Setting Range
Inch models 2 to 11
5/8" (in 1/8" increments)
Metric models 50 to 297 mm (in 1-mm increments)
BackOriginal Size
Ready to copy.
Paper Size
11x8
Set original on platen an
scanning range. (Y side,
Select
Other
Size Entry
stand.Size
XY" "
100%
(2 11
5
/ 8 )17)(2
size
Shortcut
Setting Range
Inch models 2 to 17" (in 1/8" increments)
Metric models 50 to 432 mm (in 1-mm increments)
Set
Back COriginal Size
Ready to copy.
Paper Size
11x8½"
Set original on platen and inpu
scanning range. (Y side, X side)
Select
Other
Size Entry
stand.Size
XY" "
100%
(2 11
5
/ 8 ) (2 17)
size
Shortcut