System Settings
3-33
2
Press [S] or [T] to select Management
code change (Change MGMT code with
#) and press [Change #].
3
Use the numeric keys to enter the new
management code.
4
Press [Close]. The touch panel will return to the Machine Default screen.
Activating Auto Sleep
Activates the Sleep mode. To adjust the timeout time for the Sleep mode, refer to Setting Sleep
Timer Timeout on page 3-27.
1
Access the Machine Default screen. (For instructions, refer to Accessing the Machine Default
Screen on page 3-20.)
2
Press [S] or [T] to select Auto sleep
and press [Change #].
3
Select [On] to activate or [Off] to
deactivate the Sleep mode.
4
Press [Close]. The touch panel will return to the Machine Default screen.
Management code change Back
Machine Defaul tSystem Menu
Able to change management code.(# ke y)
-
Auto sle ep
System Me nu Machine De fault
Au tom. turns in to sl e e p mo de if no o pe r. wi thi n a se t ti me
after last setting,or when copying is done.
Back
On
Off
-
To Next Page
Loading...
Need help?
General
