Copying Functions
1-2
Paper Source
Switch the paper supply to the MP tray or different cassettes to select paper of different sizes.
Follow the steps as below to select the paper source.
1
Place the originals in the document
processor or on the platen.
When [APS] is selected, paper matching
the size of the original will be selected
automatically.
NOTE: You may override the automatic
paper selection default. For details,
refer to Paper Selection on page 3-7.
2
To change the paper size, press the
button corresponding to the desired
paper size to select that paper source.
When using the MP tray, specify the
paper size and type. Refer to
Configuring MP Tray on page 3-39.
3
Press the Start key to start copying.
To Next Page
Loading...
