Copying Functions
1-4
Other Standard Size
Follow the steps as below to specify the other standard sizes.
1
Place the originals in the document processor or on the platen.
2
Press [Function].
3
Press [Original Size].
4
Press [Other stand.Size] ([Others
stand.Size]).
5
Select the original size.
6
Press the Start key to start copying.
Size Entry
Follow the steps as below to enter the original size which is not included in the standard sizes.
1
Place the originals in the document processor or on the platen.
2
Press [Function].
3
Press [Original Size].
To Next Page
Loading...
