Copying Functions
1-62
Programming Multi-Part Jobs
Using job build, individual sets of originals are scanned in separate steps for a single copy job. In
each step of the scanning process you can specify different settings (such as zooming and border
erase) and you can specify different types of originals. Other examples include inserting a blank
sheet between sets of copies from each step and specifying a front cover page during a duplexing
step.
Job Build Procedure
This procedure describes how to use job build for the following example.
Example
<Finished Copies>
In the figure, pages with asterisks indicate blank
sheets.
<Originals>
NOTE: For the preparation of this job, colored paper for the cover is loaded in the MP tray and
standard paper is loaded in the cassette 1.
Step 1: Display the Job Build screen
1
Press the Job Build key.
To Next Page
Loading...
Need help?
General
