Copying Functions
1-67
23
All originals have been scanned. Press [Scanning finished] to start the job.
24
If there are no problems with the accomplished copies, you can use Repeat Copy to produce
additional copies in the desired quantity as needed. Refer to Repeat Copy on page 1-42 for details.
You are now completed programming a copy job with job build.
Specifying Copy Functions
Paper Selection
Select the paper size as follows.
1
On the [Basic] screen, press [Paper
Selection].
2
Select the MP tray or a cassette and
press [Close].
Types of Originals
Select originals that are one-sided or two-sided, have facing pages like books or magazines, or are
like multi-page business forms.
1
On the [Basic] screen, press [Original
Type].
2
Based on the originals to be placed,
select [1 sided] ([1-sided]), [2 sided]
([2-sided]), [Book], or [Multi-Page Form]
([Multi-Page Forme]).
NOTE: When selecting [2 sided]
([2-sided]), check the binding direction
and be sure that the originals are
placed in the correct orientation.
When selecting [Book], be sure that the
binding direction is correct.
To Next Page
Loading...
