Copying Functions
1-23
4
Press [Book Erase].
5
Press [+] and [-] to specify the border
width to erase.
With metric models, you can enter the
border width directly using the numeric
keys after pressing [#-Keys].
6
Press the Start key to start copying.
Separate Border Erase
Follow the steps as below to erase the black borders specifying the width of the borders individually.
1
Place the originals in the document processor or on the platen with the top edge facing either the
rear or the left side of the copier.
2
Press [Function].
3
Press [Border Erase] ([Erase Mode]).
4
Press [Individual BordrErase]
([Individual Erase Mode]).
5
Specify the orientation of original.
To Next Page
Loading...
