Copying Functions
1-8
Original Orientation
Specify the original orientation to use these functions.
• Duplex mode
• Split mode (separate copies from two-sided originals)
• Margin mode
• Centering originals
• Border erase
• Combine mode
• Memo mode
• Page numbering
• Booklets
• Stapling (optional feature)
• Punching (optional feature)
When placing originals on the platen
When placing originals in the document processor
NOTE: You can change the default setting for the original orientation. Refer to Orientation of
Original Document on page 3-27 for details.
Follow the steps as below to specify the original orientation.
1
Place the originals in the document processor or on the platen.
2
Press [Function] and [T Down] to move to the second page.
To Next Page
Loading...
