Job Accounting
4-28
Copying with Job Accounting ON
When job accounting is activated, users must enter their department ID-code on the numeric keys
to use the copier.
IMPORTANT: After copying, be sure to press the Job Accounting key to display the initial screen
so that the next user can enter his or her department ID-code.
1
Use the numeric keys to enter the
department ID code and press [Enter].
The touch panel will return to the [Basic]
screen.
NOTE: If you enter the code
incorrectly, press [Clear] to reenter the
correct code.
Entering an invalid department ID-code
will trigger an error alarm. Use the
numeric keys to enter the correct code.
You can review the department’s copy
count by pressing [Each Job
Accounting] after entering your
department ID-code.
2
Complete the copy job as usual.
3
After copying, be sure to press the Job Accounting
key to display the initial screen so that the next user
can enter his or her department ID-code.
To Next Page
Loading...
