Copying Functions
1-54
Originals of Different Widths
Place all originals of different widths.
NOTE: This setting is only available for metric models.
The supported combinations of originals are as follows.
• A3, B4, A4 and B5
• B4, A4R and B5
• Folio, A4R and B5R
NOTE: Place originals flush against the document width guide toward the back of the copier.
IMPORTANT: When placing the originals of different width, be sure to place the edge of originals
flush against the document width guide toward the back of the copier. Failure to place originals
correctly may result in copying errors.
To Next Page
Loading...
