Kyocera TASKalfa 620 - Activating Auto Clear; Prioritizing Copying over Printing

System Settings
3-34
Activating Auto Clear
When this setting is activated, the copier reverts to the state after warm-up if no copies are made.
1
Access the Machine Default screen. (For instructions, refer to Accessing the Machine Default
Screen on page 3-20.)
2
Press [S] or [T] to select Auto Clear
and press [Change #].
3
Select [On] or [Off].
4
Press [Close]. The touch panel will return to the Machine Default screen.
Prioritizing Copying Over Printing
You can assign a higher priority to processing copying jobs than printing jobs.
NOTE: Copy Job Priority is displayed when installing the optional printer kit.
1
Access the Machine Default screen. (For instructions, refer to Accessing the Machine Default
Screen on page 3-20.)
2
Press [S] or [T] to select Copy Job
Priority and press [Change #].
3
Select [On] or [Off].
4
Press [Close]. The touch panel will return to the Machine Default screen.
System Menu
Machine D efaul t
Default menu
Date/Time
Time Zone
Management code change
Change #
Auto sleep
Auto Clear
System Menu / Counter
On
Se tti ng mod e
On
10/10/08 07:03
GTM+09:00
Auto Clear
System Me nu Machine De fault
Re turns to D e faul t automaticall y afte r co pyi ng i s do ne
or whe n the se t ti m e is p asse d afte r the l ast o pe ratio n.
Back
On
Off
-
System Menu
Machine D efaul t
Default menu
Time Zone
Management code change
Change #
Auto sleep
Copy Job Priority
System Menu / Counter
Off
Se tti ng mod e
On
GTM+09:00
Auto Clear On
Copy Job Priority
System Me nu Machine De fault
Make Copy Jobs priority
instead of Print Jobs.
Back
Off
On
-