Copying Functions
1-30
Form Overlay
Copy the original images onto the form. Once you scan
and register the form, the scanned original is overlayed
onto the form.
NOTE: To register the form, refer to Form Box on
page 2-2.
Follow the steps as below for form overlay.
1
Press [Function].
2
Press [Form Overlay].
3
Press [On].
4
Press [+] or [-] to adjust the density of
the form. Choose from ten levels in 10 %
increments.
A sample copy image is displayed to the
right.
5
To use forms already registered, press [Form Selected] ([Form Selection]) and proceed to step 6.
To scan new forms, move to step 8.
6
Press [Select Stored Frm] ([Loading
Form]).
To Next Page
Loading...
