Kyocera TASKalfa 620 - Registering Non-Standard Sizes for Originals

System Settings
3-40
Registering Non-standard Sizes for Originals
You can register up to four non-standard sizes for the original documents of non-standard size.
These non-standard sizes are displayed on the touch panel as the options for paper sizes.
1
Press the System Menu/Counter key.
2
Press [Register Orig. Size]
3
Select one of the four custom sizes
available (1 to 4). Press [Change #].
4
Press [On] to start entering the
non-standard size.
5
Press [+] or [-] to specify the vertical size
(Y) as the height.
6
Press [+] or [-] to specify the horizontal
size (X) as the width.
System Menu / Counter
Job
System Menu
Management
BOX
Report
Print
Language
MP tray
Orig. Size
Register
Management
Document
Default
Machine
Default
Copy
Se tti ng
Accounting
System Menu
Register Orig. Size
Default menu
Original size (custom 1)
Original size (custom 2)
Original size (custom 3)
Change #
Original size (custom 4)
System Menu / Counter
Se tti ng mod e
2x2 "
2x2 "
2x2 "
2x2 "
Original size (custom 1) Back
Register Orig. Si zeSystem Menu
Register custom size original.
On
Off
-
Original size (custom 1) Back
Off
On
Register Orig. Si zeSystem Menu
XY
Register custom size original.
(2 11
5
/ 8 )
"2
( 2 17)
"2
-
Original size (custom 1) Back
Off
On
Register Orig. Si zeSystem Menu
XY
Register custom size original.
(2 11
5
/ 8 )
"2
( 2 17)
"2
-