Kyocera TASKalfa 620 - Adjusting Manual Density: Photo Mode; Selecting Default Zoom

System Settings
3-13
4
Press [Close]. The touch panel will return to the Copy Default screen.
Adjusting Manual Density: Photo Mode
Adjusts the median value for the manual density range. This adjustment optimizes for copying
documents containing photo images.
1
Access the Copy Default screen. (For instructions, refer to Accessing the Copy Default Screen on
page 3-3.)
2
Press [S] or [T] to select Adj. Manual
dens.(Photo) and press [Change #].
3
Press [Lighter] or [Darker] to adjust the
density.
4
Press [Close]. The touch panel will return to the Copy Default screen.
Selecting Default Zoom
Chooses whether to use automatic zoom.
1
Access the Copy Default screen. (For instructions, refer to Accessing the Copy Default Screen on
page 3-3.)
2
Press [S] or [T] to select Zoom and
press [Change #].
3
Select [Auto %] or [100%].
4
Press [Close]. The touch panel will return to the Copy Default screen.
System Menu / Counter
System Menu
Copy Default
Au to % Prio rity Settin g
Adjust auto density.
Default menu Setting mode
Adj. Manual dens.(Mixed)
Adj. Manual dens.(Text)
Adj. Manual dens.(Photo)
Off
Change #
Standard
Standard
Standard
Standard
Adj. Manual dens.(Photo) Back
Copy De faultSystem Menu
Adjust density default setting. (Manual, Photo)
Li gh te r Darker
-
System Menu / Counter
System Menu
Copy Default
Adjust auto density.
Adj. Manual dens.(Mixed)
Default menu Setting mode
Adj. Manual dens.(Text)
Adj. Manual dens.(Photo)
Zoom
Standard
Change #
Standard
Standard
Standard
100%
Zoom
System Menu Copy Default
Se l e ct th e de faul t zo om l e ve l.
Back
Auto %
100％
-