Kyocera TASKalfa 620 - Setting Low-Power Timer Timeout; Setting Auto Clear Timeout Time

System Settings
3-28
3
Use [+] to increase the time or [-] to
decrease the time from 1 to 240
minutes.
4
Press [Close]. The touch panel will return to the Machine Default screen.
Setting Low-Power Timer Timeout
Specifies the period of time before the copier enters Low-Power mode.
The Low-Power time can be set from 1 to 240 minutes in 1-minute increments.
1
Access the Machine Default screen. (For instructions, refer to Accessing the Machine Default
Screen on page 3-20.)
2
Press [S] or [T] to select Low power
mode chng. time and press [Change #].
3
Use [+] to increase the time or [-] to
decrease the time from 1 to 240
minutes.
4
Press [Close]. The touch panel will return to the Machine Default screen.
Setting Auto Clear Timeout Time
Automatically clears all temporary settings on the operation panel when no operation is made.
Those settings revert to the default settings after the predetermined period of time. You can specify
the period after copying before the copier automatically clears the previous settings.
The auto clear timeout can be set from 10 to 270 seconds in 10-second increments.
1
Access the Machine Default screen. (For instructions, refer to Accessing the Machine Default
Screen on page 3-20.)
Sleep mode changing time Back
System Menu
Set Changi ng ti me to turn autom atically i nto sleep mo de
after l ast se tti ng ,o r whe n copyi ng i s d one.
Machine Defaul t
Minute
-
90
System Menu
Machine D efaul t
Default menu
Special paper action mode
Original Orientation
Change #
Sleep mode changing time
Low power mode chng. time
System Menu / Counter
Se tti ng mod e
Adjust print direction
Top Edge Top
Minute
Minute
Select media type(2sided)
15
90
Low p o we r mo d e chn g. time Back
System Menu
Set Changi ng ti me to turn autom. into low power mode
after l ast se tti ng,o r wh e n cop yi ng is d on e.
Machine Defaul t
Minute
-
15