System Settings
3-22
Selecting Paper Size
Specifies the paper size for the cassettes 3 and 4. The copier can automatically switch to one of
these cassettes depending on the paper size by specifying [Auto Detection]. Also, select
[Centimeter] or [Inch] as the unit of measurement.
The cassettes 3 and 4 support the following paper sizes.
11 × 17", 8 1/2 ×14", 11×8 1/2", 8 1/2 ×11", 5 1/2 ×8 1/2", 8 1/2 ×13 1/2", 8 1/2 × 13" (Oficio 2), A3, B4,
A4, A4R, B5, B5R, A5R, Folio, 8K and 16K
1
Access the Machine Default screen. (For instructions, refer to Accessing the Machine Default
Screen on page 3-20.)
2
Press [S] or [T] to choose Paper size
(Cassette 3) or Paper size (Cassette 4)
accordingly. Press [Change #] to begin
changing settings.
3
When [Auto Detection] is selected,
choose the unit of measurement. When
[Standard sizes] is selected, choose the
paper size.
4
Press [Close]. The touch panel will return to the Machine Default screen.
Selecting Media Type
Specifies the media type to the cassettes 1 to 5.
These cassettes support the following media types.
Plain, Recycled, Preprinted, Bond, Color (Colour), Letterhead, Thick paper, High Quality and
Custom 1-8
NOTE: Cassette 5 is available when the copier is equipped with the optional side feeder.
1
Access the Machine Default screen. (For instructions, refer to Accessing the Machine Default
Screen on page 3-20.)
2
Press [S] or [T] to choose from Media
type (Cassette 1) through Media type
(Cassette 5) accordingly. Press [Change
#] to begin changing settings.
To Next Page
Loading...
