System Settings
3-23
3
Select the media type.
4
Press [Close]. The touch panel will return to the Machine Default screen.
Enabling Quick Access to MP Tray Settings
Check MP tray sizing allows quick access to the MP tray Setting screen when the MP tray is
selected for copying. This allows to quickly configure the MP tray settings by changing paper size,
etc.
1
Access the Machine Default screen. (For instructions, refer to Accessing the Machine Default
Screen on page 3-20.)
2
Press [S] or [T] to select Check MP
tray sizing and press [Change #].
3
Select [On] to enable or [Off] or disable
quick access to the MP tray settings.
4
Press [Close]. The touch panel will return to the Machine Default screen.
Specifying the Paper Weight to the Media Type
Assigns one of the following paper weights to the media type.
Extra Heavy, Heavy3, Heavy2, Heavy1, Normal3, Normal2, Normal1 and Light (Thin)
NOTE: Refer to the following media types and weights (g/m²).
1
Access the Machine Default screen. (For instructions, refer to Accessing the Machine Default
Screen on page 3-20.)
System Menu / Counter
System Menu
Machine De fault
Me d i a Typ e ( Casse tte 1)
Me d i a Typ e ( Casse tte 2)
Default menu Setting mode
Me d i a Typ e ( Casse tte 3)
Me d i a Typ e ( Casse tte 4)
Check MP tray sizing
Plain
Change #
Recycled
Plain
Plain
On
Check MP tray sizing
On
Display and check MP tray setting mode when selecting.
Back
System Me nu Machi ne D efault
Select "On" when using custom size or changing me dia type.
Off
-
• Extra Heavy - OHP sheet • Normal3 - from 91 g/m² to 105 g/m²
• Heavy3 - from 171 g/m² to 200 g/m² • Normal2 - from 76 g/m² to 90 g/m²
• Heavy2 - from 136 g/m² to 170 g/m² • Normal1 - from 60 g/m² to 75 g/m²
• Heavy1 - from 106 g/m² to 135 g/m² • Light (Thin) - from 45 g/m² to 64 g/m²
To Next Page
Loading...
