Appendix
Appendix-9
Specifications
NOTE: These specifications are subject to change without notice.
Copier
Copying System Indirect electrostatic system
Originals Supported Sheets, books, and three-dimensional objects (maximum size: A3)
Copy Sizes
Cassettes 1 and 2
Cassettes 3 and 4
MP Tray
Duplexing
Non-Copying Margin:
11 × 8
1/2" and A4
11 × 17", 8
1/2 ×14", 11×8 1/2", 8 1/2 ×11", 51/2 ×8 1/2", 8 1/2 ×13",
8 1/2 ×13 1/2", A3, B4, A4, A4R, B5, B5R, A5R, Folio, 8K and 16K.
5
1/2 ×8 1/2" to 11 × 17", A5R to A3, B6R, A6R, Folio, 8K, 16K,
YOUKEI 2 and YOUKEI 4
5
1/2 ×8 1/2" to 11 × 17", A5R to A3
0.5 to 5.5 mm
Supported Paper For details on the supported paper, refer to the Paper on page 2 of the
Appendix.
Paper Supply Capacity
Cassettes 1 and 2
Cassettes 3 and 4
MP Tray
1,500 sheets (80 g/m²) × 2 cassettes
500 sheets (80 g/m²) or 525 sheets (75 g/m²) × 2 cassettes
100 sheets (80 g/m²)
Output Tray Capacity 250 sheets (80 g/m²)
Warm-up Time 30 sec
Recovery from Low-Power mode: 10 sec
Recovery from Sleep mode: 30 sec
(At room temp.: 73.4 °F/23 °C, 50 % RH)
Memory
Bitmap
Image Storage
128 MB
40 GB
Operating Environment
Temperature
Humidity
Altitude
10 to 32.5 °C
15 to 80 %
2,000 m maximum
Power Source 120 V AC, 60 Hz, 16 A
220 to 240 V AC, 50/60 Hz, 9.5 A
Dimensions
(W)×(D)×(H)
26
3/4 ×3013/16 ×467/8"
680 × 783 × 1,190 mm
Weight Approx. 413.6 lbs./Approx. 188 kg
Space Required for Copier
(W) × (D)
58 1/4 ×3013/16"
1,480 × 783 mm
To Next Page
Loading...
