Copying Functions
1-22
Sheet Border Erase
Follow the steps as below to erase the black borders from around the edges of the single sheet
original.
1
Place the originals in the document processor or on the platen.
2
Press [Function].
3
Press [Border Erase] ([Erase Mode]).
4
Press [Bord Erase Sheet].
5
Press [+] and [-] to specify the border
width to erase.
With metric models, you can enter the
border width directly using the numeric
keys after pressing [#-Keys].
6
Press the Start key to start copying.
Book Border Erase
Follow the steps as below to erase the black borders around the edges of original such as a book.
1
Place the originals in the document processor or on the platen.
2
Press [Function].
3
Press [Border Erase] ([Erase Mode]).
To Next Page
Loading...
