Kyocera TASKalfa 620 - Overwriting Hard Disk Contents

System Settings
3-35
Overwriting Hard Disk Contents
If the copier is equipped with the optional security kit, you can specify the method for overwriting the
contents of the hard disk.
NOTE: For details on methods of hard disk overwriting, refer to the security kit Operation Guide.
This setting is available only if the copier is equipped with the optional security kit.
1
Access the Machine Default screen. (For instructions, refer to Accessing the Machine Default
Screen on page 3-20.)
2
Press [S] or [T] to select Hard Disk
Overwrite and press [Change #].
3
Press [Once Overwrite] or [3-time
Overwrite].
4
Press [Close]. The touch panel will return to the Machine Default screen.
System Menu
Machine De fault
Default menu
Management code change
Auto sleep
Change #
Copy Job Priority
Hard Disk Overwrite
System Menu / Counter
On
"Once Overwrite" Method
Setting mode
Off
Auto Clear On
Hard Disk Overwrite Back
Machine Defaul t
Select the hard disk overwrite.
Once
System Menu
3- ti m e
Overwrite
Overwrite
-