Kyocera TASKalfa 620 - Selecting Collating and Offsetting Output; Selecting Auto Image Rotation

System Settings
3-14
Selecting Collating and Offsetting Output
Chooses collating and/or offsetting output as the default output.
1
Access the Copy Default screen. (For instructions, refer to Accessing the Copy Default Screen on
page 3-3.)
2
Press [S] or [T] to select Collate/Offset
and press [Change #].
3
Turn Collate and Offset [On] or [Off] as
desired.
4
Press [Close]. The touch panel will return to the Copy Default screen.
Selecting Auto Image Rotation
Auto Iimage rotation delivers sets of copied documents perpendicular to each other, allowing easy
separation of each set from the others. This mode enables automatic rotation by default.
1
Access the Copy Default screen. (For instructions, refer to Accessing the Copy Default Screen on
page 3-3.)
2
Press [S] or [T] to select Auto Image
Rotation and press [Change #].
3
Select [Off] to disable or [On] to enable
automatic rotation by default.
4
Press [Close]. The touch panel will return to the Copy Default screen.
System Menu / Counter
System Menu
Copy De fault
Adj. Manual de ns.(Mixed)
Adj. Manual dens.(Text)
Default menu Setting mode
Adj. Manual dens.(Photo)
Zoom
Collate/Offset
Standard
Change #
Standard
Standard
100%
Coll ate:On/Offset: Off
Collate/Offset
System Menu Copy Default
Select default mode for Collate/ Offset.
Back
Off
On On
Collate
Off
Offse t
-
System Menu / Counter
System Menu
Copy De fault
Adj. Manual dens.(Text)
Adj. Manual dens.(Photo)
Default menu Setting mode
Zoom
Collate/Offset
Au to Image Rotati on
Standard
Change #
Standard
100%
Col l ate:On/Offset: Off
Rotate
Auto Image Rotation
System Menu Copy Default
Se l e ct default mo de for Au to Rotation, ON or OFF.
Back
Off
On
-