Copying Functions
1-70
For hole punching, press [Punch Mode]
and complete the settings. Refer to
Punching on page 1-13 for details.
For center margin stapling, press
[Saddle Stitch] ([Center Staple]) and
complete the settings.
For center margin stapling, press
[Saddle stitch].
For center margin stapling with center
folding, press [Bind & Fold].
3
Follow the instructions at the right of the touch panel and confirm the orientation of the placed
originals.
NOTE: Failure to place originals correctly may result in copying errors.
4
Press [Close].
Reducing/Enlarging
Select the desired magnification as follows.
1
On the [Basic] screen, press [Zoom].
2
Select the desired magnification.
For instructions on reducing/enlarging,
refer to Reducing/Enlarging in Chapter 3
of the Operation Guide for details.
3
Press [Close].
To Next Page
Loading...
