Copying Functions
1-75
Page Numbering
Specify page numbering in the sequence of originals as follows.
1
Press [Edit]. On the next screen, press
[Page #] ([Page numbering]).
NOTE: The page numbering setting
applies to all other steps. Simply
complete this setting once as an initial
step.
2
For instructions on page numbering,
refer to Page Numbering on page 1-25.
3
Press [Close] to return to the screen of step 1.
Output Destination
Specify the optional document finisher or multi-job tray as the output destination as follows.
1
Press [Edit]. On the next screen, press
[Select of Output].
NOTE: The option to select the output
destination is displayed only if the
copier is equipped with the optional
document finisher or multi-job tray.
The output destination setting applies
to all other steps. Simply complete this
setting once as an initial step.
2
Specify the output destination. Refer to
Output Destination on page 1-49 for
details.
3
Press [Close].
Pl ace ori g i nal s th e n pre ss S tart ke y.
BackOutput Tray
Ready to Job build.
Se l ect p rop er outp ut tray to avoi d
job mixing.
You can confirm output tray with
management.
Auto
Tray A
Tray 1
Tray 2
Tray 3
Tray 4
Tray 5
To Next Page
Loading...
