246 X75HD/X75SD Installation and Operation Manual
Appendix B: Troubleshooting
d. Type in: d0d0
and then press ENTER (Note: These are numeric zeroes)
You will be prompted with: 0x4000006: xxxx -
e. Type in: q
and then press ENTER.
8. Close the Command Prompt DOS Box to quit the Telnet session.
9. Obtain the latest version of the release software from the Leitch
Web site and then follow the instruction to upload the files.
10. When completed, put both the Def IP and F.S. DIP switches at the
back of the X75 unit to the up position.
11. Reboot the X75HD/X75SD unit.
To Next Page
Loading...
