EDS94ARNExxxx EN 2.3 - 06/2014 L 207
9400 regenerative power supply module | Parameter setting
Diagnostics & fault analysis
Error messages
0x00680004 6815748 MXI1: Module changed during operation Warning locked -
0x00680015
6815765 MXI1: Module has been changed Information or warning locked if
the hardware type has changed
as well.
-
0x0068000a
6815754 MXI1: Module is defect or missing Fault -
0x008c000d
9175053 MXI1: Module is missing or incompatible Fault -
0x008c000f
9175055 MXI1: PROFIBUS module is missing or incompatible Fault -
0x00680010
6815760 MXI1: Wrong module System fault -
0x008c0018
9175064 MXI2: CAN module is missing or incompatible Fault -
0x008c0012
9175058 MXI2: Ethernet module is missing or incompatible Fault -
0x008c0016
9175062 MXI2: ICM module is missing or incompatible Fault -
0x00680005
6815749 MXI2: Module changed during operation Warning locked -
0x00680016
6815766 MXI2: Module has been changed Information or warning locked if
the hardware type has changed
as well.
-
0x0068000b
6815755 MXI2: Module is defect or missing System fault -
0x008c000e
9175054 MXI2: Module is missing or incompatible Fault -
0x008c0010
9175056 MXI2: PROFIBUS module is missing or incompatible Fault -
0x00680011
6815761 MXI2: Wrong module System fault -
0x006a0003
6946819 New applications loaded Information -
0x00910002
9502722 No heartbeat signal detected System fault -
0x0090000a
9437194 No parameter for module in MXI1 Fault C00615/2
0x0090000b 9437195 No parameter for module in MXI2 Fault C00615/3
0x00900000 9437184 Parameter set faulty Fault -
0x00900003
9437187 Parameter set loaded Information -
0x00900005
9437189 Parameter set restored Fault -
0x00900002
9437186 Parameter set saved Information -
0x00900009
9437193 Parameter set: type of standard device has been changed Information -
0x00900007
9437191 Parameter set: Version conflict Fault -
0x006a0015
6946837 PDO mapping (MXI1): Faulty configuration Fault -
0x006a0016
6946838 PDO mapping (MXI2): Faulty configuration Fault -
0x007d0001
8192001 PLC configuration invalid Fault -
0x007b0037
8060983 PLC configuration invalid Fault -
0x00750006
7667718 PLC configuration invalid Fault -
0x006a0012
6946834 Pointer access in impermissible memory area Fault -
0x00910010
9502736 Position value faulty Fault -
0x007b0013
8060947 Power control: Task overflow System fault -
0x0068000f
6815759 Power section incompatible System fault -
0x00680001
6815745 Power section is defect System fault -
0x00680009
6815753 Power section is defect System fault -
0x007b0042
8060994 Power section is defect System fault -
0x00680014
6815764 Power stage has been changed Information or warning locked if
the hardware type has changed
as well.
-
0x008c000a
9175050 Project not available Fault -
0x008c0009
9175049 Project not loaded Fault -
0x00720000
7471104 Read error service register Fault -
0x007b0048
8061000 Relay malfunction (inside of filter) Fault -
0x008c000b
9175051 Required licence missing Fault -
0x00680018
6815768 Safety module has been changed Information or warning locked if
the hardware type has changed
as well.
-
0x00680007
6815751 Safety module has been removed System fault -
0x00680003
6815747 Safety module is defect or missing System fault -
Error number Error message Response Adjustable in
hex dec (Lenze setting)
To Next Page
Loading...
