Colortran Encore Control Console
Software Version 3.05
132
?
BASIC RULE: Renumbering cues in Tracking mode does not
transfer soft level values to the new cue location. The soft levels stay soft and
take on new values based on the new “previous” cue.
Renumbering in Cue Only Mode: (See Figure 10.5.c.) All levels,
hard or soft, in the renumbered cue maintain their originally assigned values
when they are moved to a new location. Soft levels convert, as necessary, to
hard levels to maintain their values. The cue following the renumbered cue is
affected similarly. Tracking soft levels convert to hard levels, as necessary, to
maintain their same level, otherwise the soft levels stay soft.
Figure 10.5.c, Renumbering Cues in Cue Only Mode (after)
In the example above, you can see the results of cue 2 being renumbered as cue
3.1 while in Cue Only mode. The results are described below:
In cue 3.1:
?? Channel 1 remained a soft level because it did not need to change to a
hard level to keep the same
value of 10%.
?? Channel 2 remained a hard level at 20%.
?? Channel 3 became a hard level because it needed to in order to maintain
the same value of zero.
To Next Page
Loading...
