LSIS LSLV-S100 - Page 182

168
Learning Advanced Features
Group
Code
Name
LCD Display
Parameter Setting
Unit
8 FieldBus
9
UserSeqLink
12
Pulse
Cn
62 Speed limit setting Speed LmtSrc
0 Keypad-1
-
1 Keypad-2
2 V1
4 V2
5 I2
6 Int 485
7 FieldBus
8 UserSeqLink
63 Positive-direction speed limit FWD Speed Lmt 0-Maximum frequency Hz
64 Negative-direction speed limit REV Speed Lmt 0- Maximum frequency Hz
65 Speed limit operation gain Speed Lmt Gain 100-5000 %
In 02
Torque at maximum analog
input
Torque at 100% -12.00-12.00 mA
CNF*
21 Monitor mode display 1 Monitor Line-1 1 Speed
22 Monitor mode display 2 Monitor Line-2 2 Output Current
23 Monitor mode display 3 Monitor Line-3 3 Output Voltage
*Available on LCD keypad only.
Torque reference setting details
Code
Description
dr-08
Select an input method to use as the torque reference.
Parameter Setting
Description
0
Keypad-1
Sets the torque reference with the keypad.
1
Keypad-2
2,4,5
V1,V2,I2
Sets the torque reference using the voltage or current
input terminal of the terminal block.
6
Int 485
Sets the torque reference with the communication
terminal of the terminal block.
8
FieldBus
Input the torque reference using the inverter's
FieldBus option.
9
UserSeqLink
Enters torque reference by linking common area with
the user sequence output.
12
Pulse
Input the torque reference using the pulse input on
the inverter's terminal block.