What does Under Load mean on an LSIS Inverter?
The 'Under Load' message on your LSIS Inverter indicates that the motor underload trip is activated because the actual load level is less than the set level. This operates when parameter Pr.27 is set to a value other than 0.
What does E-Thermal mean on an LSIS Inverter?
The 'E-Thermal' message on your LSIS Inverter is displayed based on inverse time-limit thermal characteristics to prevent motor overheating. This operates when parameter Pr.40 is set to a value other than 0.
What does Low Voltage2 mean on an LSIS Inverter?
The 'Low Voltage2' message on your LSIS Inverter means that the internal DC circuit voltage is less than the specified value during inverter operation.
Why does my LSIS Inverter display Inverter OLT?
The 'Inverter OLT' message on your LSIS Inverter means the inverter has been protected from overload and resultant overheating, based on inverse time-limit thermal characteristics.
What does Ground Trip* mean on an LSIS Inverter?
The 'Ground Trip*' message on your LSIS Inverter indicates that a ground fault trip has occurred on the output side of the inverter, causing the current to exceed the specified value.
What does Over Current1 mean on an LSIS Inverter?
The 'Over Current1' message on your LSIS Inverter indicates that the inverter output current exceeds 200% of the rated current.
What does Over Voltage mean on an LSIS Inverter?
The 'Over Voltage' message on your LSIS Inverter means that the internal DC circuit voltage exceeds the specified value.
General| Brand | LSIS |
|---|---|
| Model | LSLV-S100 |
| Category | Controller |
| Language | English |
To Next Page
