Lucent Technologies MERLIN LEGEND Release 6.1 User Manual

MERLIN LEGEND Communications System Release 6.1
Feature Reference 555-661-110
Issue 1
August 1998
Features
Page 59Auto Dial
Signal/Notify You cannot program a Signal button and an Auto Dial button for the same
extension. Attempting to program both types of buttons for one extension
causes the system to erase the button that has been programmed first.
SMDR All numbers dialed on an outside call using Auto Dial are recorded on the
SMDR report.
System Access/
Intercom Buttons
When you press an inside Auto Dial button, the system automatically
selects an SA or ICOM button and turns on the speakerphone. When you
press an outside Auto Dial button, the system automatically selects an
outside line button in Key mode, a prime line button in Behind Switch
mode, or an SA button in Hybrid/PBX mode.
Transfer To transfer calls, you can press inside Auto Dial buttons instead of dialing
extension numbers. To use the one-touch Transfer option, you must
program inside Auto Dial buttons for extensions to which you transfer
calls. When an operator transfers a call and it returns unanswered, the
green LED next to the Auto Dial button flashes to indicate the extension
from which the call is returning. Only system operators receive this
indication.
UDP Features In Release 6.0 and later systems (Hybrid/PBX mode only), non-local
extension numbers can be programmed on outside Auto Dial buttons but
not on inside Auto Dial buttons.

Lucent Technologies MERLIN LEGEND Release 6.1 Specifications

General

Brand	Lucent Technologies
Model	MERLIN LEGEND Release 6.1
Category	Conference System
Language	English