Lucent Technologies MERLIN LEGEND Release 6.1 User Manual

MERLIN LEGEND Communications System Release 6.1
Feature Reference 555-661-110
Issue 1
August 1998
Prior Releases: Features and Enhancements
Page xxixRelease 5.0 Enhancements (June 1997)
Authorization Codes and
Remote Call Forwarding 0
In Release 6.0 and later Key or Hybrid/PBX mode systems, forwarding features,
including Centrex Transfer via Remote Call Forwarding, but excluding Follow Me,
can be activated or deactivated at a multiline telephone by entering the
authorization code for the extension from which calls are to be forwarded. The
user enters the authorization code, then activates or deactivates the forwarding
feature in the normal fashion. This is especially useful for a single-line telephone
user who must include a Pause character in a Centrex Transfer via Remote Call
Forwarding dialing sequence, because the character cannot be dialed at a single-
line telephone. It is also useful when activating Call Forwarding or Remote Call
Forwarding at phantom stations, or via remote access (e.g. from another switch in
the network). No other features can be used by entering an authorization code in
this fashion.
Release 5.0 Enhancements (June 1997) 0
Release 5.0 includes all Release 4.2 functionality, plus the enhancements listed
below.
Computer Telephony Integration (CTI) 0
Beginning with Release 5.0, a PassageWay
®
Telephony Services CTI link from
the MERLIN LEGEND Communications System to a LAN server running Novell
®
NetWare
®
software allows Lucent Technologies-certified telephony applications to
control and monitor MLX and analog multiline telephone (BIS only) operations.
The physical connection for the CTI link is an MLX port on a 008 MLX or 408 MLX
module on the MERLIN LEGEND Communications System control unit and ISDN
link interface card plugged into the customer’s server. The feature is available for
Hybrid/PBX mode systems only.
NOTE:
The NetWare server software version must be 3.12, 4.1 or 4.11.
The 008 MLX and 408 MLX modules must have firmware vintage other
than 29. If the module has firmware 29, programming a CTI link on the
module is prevented. An earlier or later vintage firmware is supported.
Basic Call Control 0
A CTI link application on a user’s computer can assume basic call control of the
user’s analog multiline or MLX telephone’s SA buttons. Basic call control includes:
■ Answering calls arriving on an SA button
■ Making calls from an SA button

Lucent Technologies MERLIN LEGEND Release 6.1 Specifications

General

Brand	Lucent Technologies
Model	MERLIN LEGEND Release 6.1
Category	Conference System
Language	English