MERLIN LEGEND Communications System Release 6.1
Feature Reference
555-661-110
Issue 1
August 1998
Features
Page 217Direct Station Selector
Direct Station Selector
At a Glance
Description
One or two Direct Station Selectors (DSSs) can be connected to an MLX-20L or
MLX-28D telephone assigned as an operator position. The DSS enhances the
call-handling capabilities of an operator with a Direct-Line Console (DLC) or a
QCC. When connected to an MLX-20L telephone used as a system programming
console, the DSS facilitates system programming and centralized telephone
programming procedures. When used with the Extension Status feature or by a
calling group or Call Management System (CMS) supervisor, the DSS allows a
user to determine, at a glance, calling group or CMS group member status or
room status.
The DSS provides the following call-handling capabilities or information:
■ One-touch dialing of inside extensions
■ One-touch Transfer
■ One-touch Hold (DLC only)
■ On-hook, off-hook, or Do Not Disturb status of extensions in the system
■ Extension status indication (group member or room status)
■ Calling group queue status
■ Message-waiting LED status
■ Operator park zones
Users Affected Operators
Reports Affected Operator Information
Modes All
Telephones MLX-20L, MLX-28D
System Programming Assign extension numbers selected when DSS buttons are
pressed:
●
6\V5HQXPEHU→6LQJOH→More→'66%XWWRQ
Maximums 16 DSSs for each system
2 DSSs for each console (1 for each console if 3 or more
consoles in one carrier)
150 extension numbers for each DSS (3 pages of extension
numbers, 50 extension numbers for each page)
Factory Settings
Page 1 button
Page 2 button
Page 3 button
Starts with Extension 0
Starts with Extension 50
Starts with Extension 100
To Next Page
Loading...
Need help?
General
