MERLIN LEGEND Communications System Release 6.1
Feature Reference
555-661-110
Issue 1
August 1998
Features
Page 371Integrated Administration
Automatic Reconciliation 24
NOTE:
The automatic reconciliation program has been disabled beginning with
IS III Version 1.2.
In IS III versions prior to 1.2, if a technician or system manager uses the MLX-20L
console or a PC with SPM to change extension numbering on the switch, the
system and the application database are no longer in agreement. To reduce the
chance for such changes to disrupt communications between the system and the
applications, Integrated Administration includes an automatic reconciliation
program that runs every day at 3:00 a.m., comparing the application database to
the switch programming and bringing the two into agreement. The program
makes changes, as necessary, only to the application database, according to the
rules listed in Table 25
. It does not change the system programming.
Table 25. Database Reconciliation Rules
Installation Overview 25
A qualified technician can use Integrated Administration during installation of
IS III. The steps below describe basic tasks, not detailed procedures. (See the
AUDIX Voice Power or Fax Attendant
System Manager’s Guide
for complete
instructions about programming the applications. See
System Programming
for
complete instructions about programming the system.) The sequence of tasks
differs, depending on the installation:
Extension appears in ...
System
Application
Database Action
Yes Yes None
Yes No Extension is added to database. Can be added as a sub-
scriber to AUDIX Voice Power or AUDIX Voice
Power/Fax Attendant through Extension Directory
screen.
No Yes
(regular extension)
Extension is deleted from database and removed as an
AUDIX Voice Power or AUDIX Voice Power/Fax Atten-
dant subscriber.
No Yes
(special extension)
Extension is retained as special-purpose extension in
database.
Yes Yes
(special extension)
Extension is converted from special-purpose extension to
regular extension in database.