Lucent Technologies MERLIN LEGEND Release 6.1 User Manual

MERLIN LEGEND Communications System Release 6.1
Feature Reference 555-661-110
Issue 1
August 1998
Features
Page 208Direct-Line Console
Direct-Line Console
At a Glance
Users Affected DLC operators only
Reports Affected System Information (
6\V6HWXS), Operator Information,
Extension Information
Modes All
Telephones
MLX
Analog Multiline
MLX-20L, MLX-28D
®
BIS-22D, BIS-34, BIS-34D, MERLIN II System Display
Console
System Programming Assign or remove an individual DLC position:
●
2SHUDWRU→3RVLWLRQV→'LUHFW/LQH→6WRUH$OO
Enable or disable DLC operator automatic Hold systemwide:
●
2SHUDWRU→'/&+ROG
When one-touch Transfer is programmed, select either
automatic or manual completion for system operators:
●
2SWLRQV→7UDQVIHU→2QH7RXFK→7UDQVIHU
Change the duration of the timer signaling a call still on hold:
●
2SHUDWRU→+ROG7LPHU
Maximums
Operator positions (total
DLCs and QCCs)
DLCs for each module
8
2
MLX Display Labels
Factory Settings
Personal Lines
MLX DLC
Analog DLC
DLC Operator Automatic
Hold
Operator Hold Timer
One-Touch Transfer with
Automatic Completion
Primary System Operator
Position
Park Zone Extensions
See “Display” on page 247
.
Lines 1–18
Lines 1–32
Disabled
60 sec (range 10–255 sec)
Enabled
First (lowest) jack on first MLX or analog extension module,
fixed
881–888

Lucent Technologies MERLIN LEGEND Release 6.1 Specifications

General

Brand	Lucent Technologies
Model	MERLIN LEGEND Release 6.1
Category	Conference System
Language	English