MERLIN LEGEND Communications System Release 6.1
Feature Reference
555-661-110
Issue 1
August 1998
Features
Page 222Direct Station Selector
Table 11. Results of Pressing DSS Button while Active on a Call: DLC Position with
One-Touch Transfer
Extension Type Result
Individual or calling
group
The caller is put on hold, transfer is initiated, an SA or ICOM button
is selected automatically, and the extension number is dialed
automatically. If manual completion is programmed, an operator
must press another button or hang up to complete the transfer. If
automatic completion is programmed, the transfer is completed
automatically.
Pool dial-out code or
ARS code
The caller is put on hold, transfer is initiated, the pool dial-out code
is automatically dialed, and the operator can then dial the outside
telephone number. Transfer completion is always manual; the
operator must press another button or hang up to complete the
transfer, whether the system is programmed for manual or
automatic completion.
Paging group The caller is put on hold, an SA or ICOM button is selected
automatically, and the paging group extension number is dialed
automatically. Transfer is not completed automatically, whether the
system is programmed for one-touch Hold or one-touch Transfer,
because calls cannot be transferred to a paging group.
Park zone The Park feature is activated, and the call is put on hold in the
selected park zone to allow Pickup from any extension in the
system.
Line/trunk number, LDN,
unassigned extension
numbers,
dial 0 calls
Ignored, no effect
To Next Page
Loading...
Need help?
General
