Lucent Technologies MERLIN LEGEND Release 6.1 User Manual

MERLIN LEGEND Communications System Release 6.1
Feature Reference 555-661-110
Issue 1
August 1998
General Feature Use and Telephone Programming
Page D-14Telephone Programming
D
Table 52. Programming MLX Telephones Using the Display
Step Action
1 Label the button to be
programmed.
Note: Skip this step if the feature
will not be programmed onto a
button.
Remove the clear label cover from the telephone by
pulling up on the tab that extends from the top of the
cover.
Write the feature name on the card next to the
button to be programmed.
Replace the cover.
2 Begin programming. Press Menu.
Select
([W3URJUDPfrom the display.
Select
6WDUW from the display.
3 Identify the button to be
programmed.
To delete the features currently
programmed on the button:
To display features:
Press the button you labeled.
Note: If the feature does not get programmed onto a
button, press any line button. This does not affect
the button in any way.
The display identifies the feature currently
programmed on the button. If no feature is
programmed, the display indicates that the button is
blank.
Select 'HOHWH from the display. The button is now
blank.
Press the button you labeled again to continue
programming.
Note: If the currently programmed feature was not
deleted from the button, the new feature
programmed onto it will replace it.
Select
/LVW)HDWXUH from the display.
The screen lists feature names in alphabetical order.
Continued on next page

Lucent Technologies MERLIN LEGEND Release 6.1 Specifications

General

Brand	Lucent Technologies
Model	MERLIN LEGEND Release 6.1
Category	Conference System
Language	English