Lucent Technologies MERLIN LEGEND Release 6.1 User Manual

MERLIN LEGEND Communications System Release 6.1
Feature Reference 555-661-110
Issue 1
August 1998
Features
Page 77Automatic Route Selection
Route Selection within the Table 2
Once the table is selected, ARS checks the subpatterns within the table (if
applicable) and the restrictions on the routes.
Figure 2. ARS Route Selection within a Table
Subpatterns 2
Depending on the time of the call, one of two subpatterns (each with up to six
different routes) is chosen for each table [except the Special Numbers (N11) and
Dial 0 Tables]. The time of day is compared to the start and stop times of
Subpatterns A and B. (The start time for Subpattern A is the stop time for
Subpattern B.) If the time of the call is between the Subpattern B start time and
stop time, then Subpattern B is selected; otherwise Subpattern A is selected. If
both Subpatterns have 00:00 start times, Subpattern A is selected. (See Figure 3
.)
If appropriate for
the selected table,
select Subpattern
A or B depending
on time of day.
START
NO
Return
fast busy
Selected Table
Select first route
where:
•
telephone’s
FRL is > route’s
FRL and route
is not busy
call type
matches route
type (data,
voice, or both)
•
Route available?
Route Call
YES

Lucent Technologies MERLIN LEGEND Release 6.1 Specifications

General

Brand	Lucent Technologies
Model	MERLIN LEGEND Release 6.1
Category	Conference System
Language	English