MERLIN LEGEND Communications System Release 6.1
Feature Reference
555-661-110
Issue 1
August 1998
Features
Page 161Coverage
â– Do Not Disturb. Calls go to coverage, if programmed.
NOTE:
In Release 6.0 and later systems (Hybrid/PBX mode only), non-local UDP
calls are treated as outside calls by the system and by Selective Coverage
features: Coverage Off, Coverage Inside, and Coverage VMS off.
Eligibility for Coverage 6
Not all calls are eligible for coverage. Eligibility is determined by the type of call
and by how the sender’s telephone is set up. Table 7
shows which calls at the
sender’s telephone are eligible for coverage.
Table 7. Calls Eligible and Calls Ineligible for Coverage
NOTES:
1. In Release 2.0 and later systems, when a coverage receiver calls a
coverage sender, the call can be sent to coverage. If a receiver calls a
sender for whom he or she is covering and the sender is busy or
unavailable, the call proceeds to other points of coverage. It does not
come back to the receiver who originated the call.
In Release 1.0 and 1.1 systems, a call from a receiver to a sender is
not sent to coverage.
Call Rings on ... Eligible Ineligible
SA or ICOM button programmed for Immediate or Delay Ring
Inside calls
DID trunk calls
Inside or outside transferred calls
Calls forwarded from another extension
Calls on Shared SA buttons
Calls on Cover buttons
Voice-announced calls
Transfer return calls
Returning parked calls
Reminder service calls










Personal line button programmed for Immediate or Delay Ring
Sender is principal user
Someone else is principal user
No principal user is assigned



Pool button programmed for Immediate or Delay Ring 
Any button programmed for No Ring 
To Next Page
Loading...
Need help?
General
