MERLIN LEGEND Communications System Release 6.1
Feature Reference
555-661-110
Issue 1
August 1998
Features
Page 247Display
Display
At a Glance
Description
The following display telephones can be connected to the system:
■ MLX display telephones:
— MLX-20L (7-line by 24-character display)
— MLX-28D (2-line by 24-character display)
— MLX-16DP (2-line by 24-character display)
— MLX-10D (2-line by 24-character display)
— MLX-5D (2-line by 24-character display)
■ Analog multiline display telephones:
— MERLIN II System Display Console (2-line by 40-character display)
— BIS-34D (1-line by 16-character display)
— BIS-22D (1-line by 16-character display)
The telephone display provides prompts, messages, and menu selections that
help users handle calls, use features, and program their extensions. In addition,
the display of the MLX-20L telephone supports system programming when the
telephone is used as the system programming console. (For information about
system programming displays, see “Programming” on page 535
.)
Beginning with Release 3.0, when a number is displayed for an incoming call, it
appears with hyphens inserted between the digits (for example,
for a
7-digit number and
for a 10-digit number). Any other number of
digits appears without hyphens.
Users Affected Telephone users, operators
Modes All
Telephones MLX display telephones, MERLIN II System Display Console,
BIS-22D, BIS-34D
System Programming See “Labeling” on page 400
and “Uniform Dial Plan Features”
on page 710.
To Next Page
Loading...
Need help?
General
