Lucent Technologies MERLIN LEGEND Release 6.1 User Manual

MERLIN LEGEND Communications System Release 6.1
Feature Reference 555-661-110
Issue 1
August 1998
Features
Page 578Remote Access
Remote Access 39
At a Glance 39
Users Affected Telephone users, operators, data users
Reports Affected Remote Access (DISA) Information, SMDR
Modes All
Telephones Touch-tone only
System Programming Assign dedicated or shared remote access to lines/trunks:
●
/LQHV7UXQNV→5HPRWH$FFVV→/LQHV7UXQNV
If barrier codes are not used, assign class of restrictions to
lines/trunks:
●
/LQHV7UXQNV→5HPRWH$FFVV→1RQ7LH7LH/LQHV→
5HVWULFWLRQ$565HVWUFW$OORZ/LVW'LVDOORZ/LVW
Assign class of restriction for each barrier code:
●
/LQHV7UXQNV→5HPRWH$FFVV→%DUULHU&RGH5HVWULF
WLRQ$565HVWUFW$OORZ/LVW'LVDOORZ/LVW
Specify that barrier codes are required for remote access:
●
/LQHV7UXQNV→5HPRWH$FFVV→1RQ7LH7LH/LQHV→
%DUULHU&RGH
Add, change, or remove individual barrier codes, or change
length of all barrier codes:
●
/LQHV7UXQNV→5HPRWH$FFVV→%DUULHU&RGH→&RGH,QIR
Assign barrier codes to remote access system programming
lines/trunks (nonfunctional; do not use):
●
/LQHV7UXQNV→5HPRWH$FFVV→%DUULHU&RGH→63URJ0DLQW
Enable or disable Callback for busy pools:
●
/LQHV7UXQNV→5HPRWH$FFVV→$XWR4XHXLQJ
Specify destination of remote access calls to unassigned
numbers:
●
2SWLRQV→More→8QDVVLJQHG
Change remote access code:
●
6\V5HQXPEHU→6LQJOH→5HPRWH$FFV
Maximums 16 barrier codes, with a 4- to 11-digit length (set systemwide),
using 0–9 and dialpad characters. All barrier codes are
deleted when the systemwide barrier code length is changed.
Factory Settings
ARS FRL for Barrier Codes
or Lines/Trunks
Autoqueuing
0
Disabled

Lucent Technologies MERLIN LEGEND Release 6.1 Specifications

General

Brand	Lucent Technologies
Model	MERLIN LEGEND Release 6.1
Category	Conference System
Language	English