MERLIN LEGEND Communications System Release 6.1
Feature Reference
555-661-110
Issue 1
August 1998
Features
Page 364Inspect
Inspect 24
At a Glance 24
Description 24
Inspect allows an MLX display telephone user who is on a call to see call
information about an incoming call that is ringing, alerting, or on hold.
Call information includes whether it is an inside or outside call, any programmed
labels for the caller (such as the inside caller’s name or the label assigned to the
outside line), and how the call came to the user (transferred, coverage call,
forwarded, and so on). Inspect also can be used to inventory what is programmed
on the telephone’s buttons.
To use Inspect to screen incoming calls while on another call or to identify callers
on hold, press the Inspct button on the MLX display telephone and then press the
line button with the incoming or held call. The call information is displayed on the
Inspect screen.
To inspect a programmed button, press the Inspct button and then the
programmed button. The name of the feature programmed on the button is
displayed on the screen. However, beginning with Release 2.0, pressing a
programmed Last Number Dial or Saved Number Dial button shows the telephone
number stored. If no number is stored, the feature name is displayed.
Considerations and Constraints 24
If the company subscribes to special services, such as AT&T’s INFO2 ANI service
or Caller ID, the display shows the outside telephone number of the person
calling.
NOTE:
The availability of the caller identification information may be limited by the
local-serving (caller’s) jurisdiction, availability, or central office equipment.
When a line button is being inspected, it cannot be used to make or receive a call.
If a user inspects a line that someone else is using, the display shows that the line
is in use.
Users Affected Telephone users, operators
Modes All
Telephones MLX display telephones
To Next Page
Loading...
Need help?
General
