Lucent Technologies MERLIN LEGEND Release 6.1 - Automatic Route Selection

MERLIN LEGEND Communications System Release 6.1
Feature Reference 555-661-110
Issue 1
August 1998
Features
Page 68Automatic Route Selection
Automatic Route Selection 2
At a Glance 2
Users Affected Telephone users, operators, data users
Reports Affected ARS, Extension Directory, Extension Information, Remote
Access (DISA) Information
Mode
Hybrid/PBX only
Telephones All
System Programming Specify the type of table (6-digit, area code, local exchange,
or 1 + 7) and the area codes and/or exchanges to be included
in the table:
●
7DEOHV→$56→$56,QSXW
Specify that 1 + 7 tables should be searched when a leading 1
is dialed:
●
7DEOHV→$56→$56'LDO
Specify time of day when calls are routed by using Subpattern
A or B routing information:
●
7DEOHV→$56→6XE%6WDUW6WRS
Identify the pools (up to six) on which calls are to be routed:
●
7DEOHV→$56→6XE$3RROV6XE%3RRO
Assign or remove the FRL associated with each route:
●
7DEOHV→$56→6XE$)5/6XE%)5/
Specify the number of digits that need to be absorbed by the
system when it routes calls on an identified route:
●
7DEOHV→$56→6XE$$EVRUE6XE%$EVRUE
Specify the digits or special characters that must be added by
the system to the number dialed by a user when calls are
routed on an identified route:
●
7DEOHV→$56→6XE$'LJLW6XE%'LJLW
Specify the FRL and/or digits that must be added when
people dial emergency numbers in the Special Numbers
(N11) table:
●
7DEOHV→$56→More→6SHFO1XPEHU→$56)5/$56'LJLW
Specify the pool routing, FRL, and digits or special characters
that must be added by the system to the number dialed by a
user when calls are routed on the Dial 0 table:
●
7DEOHV→$56→More→'LDO→$563RRO$56)5/$56
'LJLWV
Specify whether a route is to be used for voice, data, or both
on a T1, BRI, or PRI call:
●
7DEOHV→More→6XE$'DWD6XE%'DWD