Lucent Technologies MERLIN LEGEND Release 6.1 User Manual

MERLIN LEGEND Communications System Release 6.1
Feature Reference 555-661-110
Issue 1
August 1998
Applications
Page I-23Lucent Technologies Attendant
I
Platform Requirements 62
To connect Lucent Technologies Attendant to the system, you need the following
equipment:
■ Lucent Technologies Attendant unit
■ A 6-wire modular telephone cord
■ A 012 module (and ring generator, if the module has the apparatus code
517F13). Current 012 modules [apparatus code 517G13 (28) or
higher-letter or lower letter] include a built-in ring generator and work with
all releases of the system.
NOTE:
The system may require additional TTRs to allow a 012 or 016 (T/R)
module to handle a large number of voice connections. Two TTRs
are provided on the 012 module and four are provided on the
016 (T/R) module. For guidelines on TTR needs, see Table 62, page
I–19.
The number of Lucent Technologies Attendants that the system requires depends
on the number of incoming lines/trunks and the number of busy-hour calls. One is
normally sufficient for handling after-hours calls only and for delayed (secondary)
call handling. Table 63
shows the requirements when you program Lucent
Technologies Attendant for primary (immediate) call handling.
Table 63. Lucent Technologies Attendants Required
Number of
Attendants Required
Incoming
Lines/Trunks Busy-Hour Calls
2 1 to 6 1 to 25
3 7 to 9 25 to 50
4 10 to 12 50 to 100

Lucent Technologies MERLIN LEGEND Release 6.1 Specifications

General

Brand	Lucent Technologies
Model	MERLIN LEGEND Release 6.1
Category	Conference System
Language	English