MERLIN LEGEND Communications System Release 6.1
Feature Reference
555-661-110
Issue 1
August 1998
Features
Page 226Direct Station Selector
NOTE:
Fast flashing is applicable only to DSS buttons for individual extensions.
Slow flashing is applicable to DSS buttons for individual extensions, calling
group extensions, and line/trunk numbers.
Calling Group or CMS Supervisory Operation
A supervisor with a DLC switches from normal call handling to supervisor
operation by pressing the Feature button, dialing
, and pressing the Hold
button. The effect of pressing a DSS button while in supervisor operation is the
same as that described for normal call-handling operation. See “Group Calling” on
page 312 for additional information.
When the supervisory position is not in Message Status operation, the green LED
next to the Message Status button is off. The red LED next to each DSS button
for a calling group member’s extension is used to monitor the availability of
members to take calls directed to the calling group.
In Release 6.1 and later systems, Calling Group and CMS Supervisor Operation
is only available for local extensions.
The meaning of the red LED associated with each group member is shown in
Table 14
.
Table 14. LED Meanings for Supervisor Operation without Message Status Active
NOTE:
The LEDs next to DSS buttons for all other types of extensions are always
off and have no meaning.
LED Status
Extension
Status Meaning
Off 0 The extension is signed out from the group, and the member
is unavailable to take calls.
On
■
2 The extension is signed into the group, and calls can be sent
to the member.
Slow Flashing 1 Used for CMS only; the extension is in the after-call work
state, and the group member is not available to take calls.
To Next Page
Loading...
Need help?
General
