MERLIN LEGEND Communications System Release 6.1
Feature Reference
555-661-110
Issue 1
August 1998
Features
Page 157Coverage
Ring Timing Options, summarized in Table 5, are programmable on any buttons,
including programmed Cover buttons on multiline telephones.
Table 5. Ring Timing Options
Regardless of how these ringing options are programmed, the green LED next to
the Cover button on the receiver’s telephone flashes immediately when a call
begins ringing at the sender’s telephone. The receiver’s telephone rings audibly,
as shown in Table 6
. Both telephones continue to ring as programmed. The green
LED on both telephones continues to flash until the call is answered either by the
sender or by the receiver or the caller hangs up.
Table 4. Continued
Timer
Factory
Setting Range Description
Secondary Cover
Ring Delay
2 rings 1–6 rings Release 4.1 and later systems, programmable for
each extension. In addition to the fixed Secondary
Coverage Delay Interval (2 rings), this timer sets the
delay before a Secondary Cover button programmed
for Delay Ring begins to ring audibly. This setting
does not affect Primary or Group Coverage call
delivery.
Secondary
Coverage
Delay Interval
2 rings Fixed Delay before sending Individual Coverage calls to a
Secondary Cover button programmed for Immediate
Ring, when sender also has Individual Coverage to a
Primary Cover button.
In Release 4.1 and later systems, the delay (in
addition to the Secondary Cover Ring Delay setting
for the sender) before a Secondary Cover button
programmed for Delay Ring begins to ring audibly.
Retry Timing
Interval
5 sec Fixed Repetition interval for trying to send calls to group
coverage when no receivers are available; continues
until call is answered by sender or receiver (or caller
hangs up).
Option
Factory
Setting Range Description
Immediate — — —
Delay Ring 2 rings 1–6 rings on
Cover
buttons
Delay before sending calls to Group Coverage (in
addition to Coverage Delay Interval) when sender
also has Individual Coverage
and
receiver is
available.
No Ring — — On sender (covered) telephone, prevents calls from
going to coverage.
To Next Page
Loading...
Need help?
General
